Author: Jeff Gapp

Status as of Sunday afternoon. Front trim and doors to complete but that will be later on down the road. 

Spent the weekend building storage shelves…lots and lots of storage.

I have two projects left on the interior of the house:

1. Baseboards
2. Cabinets

In the case of the cabinets it’s more than just cabinets. It will be cabinets plus shelving and other doodads to complete a laundry room, pantry, mud rooms and two walk-in closets.

So below is a picture of the first carcase that I am working on.

Total cost at this point is $40 including the maple face frames (not seen)

Last night I finally got everything put together with the table saw. The output table set up, everything calibrated.

I then built the final thing that I needed to be able to start building cabinets…the cross-cut sled. These things are pretty easy to make. I ordered a couple of guides, cut a piece of wood and screwed them on.

Bingo. The last thing to do is square the fence to the blade. I used the 5-cut method and then the dial-in method.

Dead square.

Now I’m off to Europe for a couple of weeks and when I get back I’ll start putting cabinets together.

Almost there. Just have to finish painting the drawers and we’re good.

Here’s the nearly finished laundry pedestal with a coat of primer. The odd cutout in the back is for the dryer vent. The drawer fronts make it look symmetrical.

I’ll show a shot when it’s done and in place